501 found, showing page 5 of 13
16-14 RING TERMINAL
Vinyl-insulated barrel ring terminal rated a 600 volt maximum. Temperature rating: 167 deg (degrees) Fahrenheit/75 deg Celsius.
View Details
Vinyl-insulated barrel ring terminal rated a 600 volt maximum. Temperature rating: 167 deg (degrees) Fahrenheit/75 deg Celsius.
22-18 RING TERMINAL
Vinyl-insulated barrel ring terminal rated a 600 volt maximum. Temperature rating: 167 deg (degrees) Fahrenheit/75 deg Celsius.
View Details
Vinyl-insulated barrel ring terminal rated a 600 volt maximum. Temperature rating: 167 deg (degrees) Fahrenheit/75 deg Celsius.
2/0-2 SPLT BLT CONNECTOR
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
View Details
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
KIT SPLICE PUMP
For waterproof splicing of submersible pump cable and other underground UF cables. Copper wire range 8 to 14 AWG (American Wire Gauge). Special brass connector is used to make a solid splice. The mastic-lined heat-shrinkable tubing is used over the connector for a complete waterproof splice connection. 600-volt rating 105 deg (degrees) Celsius, 221 deg Fahrenheit. UL (Underwriter's Laboratories) listed.
View Details
For waterproof splicing of submersible pump cable and other underground UF cables. Copper wire range 8 to 14 AWG (American Wire Gauge). Special brass connector is used to make a solid splice. The mastic-lined heat-shrinkable tubing is used over the connector for a complete waterproof splice connection. 600-volt rating 105 deg (degrees) Celsius, 221 deg Fahrenheit. UL (Underwriter's Laboratories) listed.
11" SS CABLE TIE
Stainless steel cable tie designed for harsh, corrosive, and salt-water environments. Resistant to chemicals and high temperatures making them ideal for use in automotive applications. Constructed of 304 stainless steel. Features a self-locking ball mechanism for low insertion force requirements and high tensile strength. Operating temperature rated up to 572 degrees Fahrenheit.
View Details
Stainless steel cable tie designed for harsh, corrosive, and salt-water environments. Resistant to chemicals and high temperatures making them ideal for use in automotive applications. Constructed of 304 stainless steel. Features a self-locking ball mechanism for low insertion force requirements and high tensile strength. Operating temperature rated up to 572 degrees Fahrenheit.
50PK 36" BLK CBLE TIE
Ultraviolet and weather-resistant black nylon cable tie. Resists harmful light rays from the sun. Bent tip ensures easy insertion into the tie head. Easy slip during pull-through due to smooth radiused edges. Finger grips on end provides secure grip to tighten. Serviceable from 32 Deg (degrees) F (Fahrenheit) through 185 Deg F.
View Details
Ultraviolet and weather-resistant black nylon cable tie. Resists harmful light rays from the sun. Bent tip ensures easy insertion into the tie head. Easy slip during pull-through due to smooth radiused edges. Finger grips on end provides secure grip to tighten. Serviceable from 32 Deg (degrees) F (Fahrenheit) through 185 Deg F.
6"COAXIAL CRIMPER/CUTTER
6". Coax crimper and cutter made of carbon steel and black electrophoresis finish. Dual grounded cutting blades, easy-to-read laser etched marking. Crimps RG-59 and RG-6 F connectors and 18 AWG wire. Nonslip cushion grip handle.
View Details
6". Coax crimper and cutter made of carbon steel and black electrophoresis finish. Dual grounded cutting blades, easy-to-read laser etched marking. Crimps RG-59 and RG-6 F connectors and 18 AWG wire. Nonslip cushion grip handle.
100PC 4" BLK CABLE TIE
Ultraviolet and weather-resistant black nylon cable tie. Resists harmful light rays from the sun. Bent tip ensures easy insertion into the tie head. Easy slip during pull-through due to smooth radiused edges. Finger grips on end provides secure grip to tighten. Serviceable from 32 Deg (degrees) F (Fahrenheit) through 185 Deg F.
View Details
Ultraviolet and weather-resistant black nylon cable tie. Resists harmful light rays from the sun. Bent tip ensures easy insertion into the tie head. Easy slip during pull-through due to smooth radiused edges. Finger grips on end provides secure grip to tighten. Serviceable from 32 Deg (degrees) F (Fahrenheit) through 185 Deg F.
4OZ ANTIOXIDANT
Ox-Gard antioxidant compound penetrates aluminum oxide to maintain inter-strand and inter-conductive current paths. Guards against oxidation, improves conductivity and produces a cooler connection. Excellent for AL/AL, AL/CU wire connections and aluminum conduit joints.
View Details
Ox-Gard antioxidant compound penetrates aluminum oxide to maintain inter-strand and inter-conductive current paths. Guards against oxidation, improves conductivity and produces a cooler connection. Excellent for AL/AL, AL/CU wire connections and aluminum conduit joints.
GROUNDING SCREW
10-32 x 3/8" hex washer combination slotted/cross recess Type 1 for No. 2 driver size. Green. UL listed. 10 per poly bag.
View Details
10-32 x 3/8" hex washer combination slotted/cross recess Type 1 for No. 2 driver size. Green. UL listed. 10 per poly bag.
NYLON CLAMP 1"
Tough, durable, and lightweight polypropylene clamps. Working temperature range: -60 deg (degrees) F (Fahrenheit) to 340 deg F.
View Details
Tough, durable, and lightweight polypropylene clamps. Working temperature range: -60 deg (degrees) F (Fahrenheit) to 340 deg F.
NYLON CLAMP 3/4"
Tough, durable, and lightweight polypropylene clamps. Working temperature range: -60 deg (degrees) F (Fahrenheit) to 340 deg F.
View Details
Tough, durable, and lightweight polypropylene clamps. Working temperature range: -60 deg (degrees) F (Fahrenheit) to 340 deg F.
1/2" NYLON CLAMP
Tough, durable, and lightweight polypropylene clamps. Working temperature range: -60 deg (degrees) F (Fahrenheit) to 340 deg F.
View Details
Tough, durable, and lightweight polypropylene clamps. Working temperature range: -60 deg (degrees) F (Fahrenheit) to 340 deg F.
3/8" NYLON CLAMP
Tough, durable, and lightweight polypropylene clamps. Working temperature range: -60 deg (degrees) F (Fahrenheit) to 340 deg F.
View Details
Tough, durable, and lightweight polypropylene clamps. Working temperature range: -60 deg (degrees) F (Fahrenheit) to 340 deg F.
1/4" NYLON CLAMP
Tough, durable, and lightweight polypropylene clamps. Working temperature range: -60 deg (degrees) F (Fahrenheit) to 340 deg F.
View Details
Tough, durable, and lightweight polypropylene clamps. Working temperature range: -60 deg (degrees) F (Fahrenheit) to 340 deg F.
100PC 4" NATRL CABLE TIE
Self-locking, 1-piece molded nylon ties easily secure wire bundles, cables, and more. Natural color, self-extinguishing. Serviceable from -40 Deg (degrees) F (Fahrenheit) through 185 Deg F. UL (Underwriter's Laboratories) listed. CSA (Canadian Standards Association) approved.
View Details
Self-locking, 1-piece molded nylon ties easily secure wire bundles, cables, and more. Natural color, self-extinguishing. Serviceable from -40 Deg (degrees) F (Fahrenheit) through 185 Deg F. UL (Underwriter's Laboratories) listed. CSA (Canadian Standards Association) approved.
OPEN END SPLICE CAP
Open-end construction splice cap for ease in cutting wires flush with caps. Caps easily removed without damaging wire. Zinc-plated steel. Wire range: No. 18 thru 10 AWG, minimum 2 No. 6, maximum 2 No. 10 with 1 No. 12. 100 per pack.
View Details
Open-end construction splice cap for ease in cutting wires flush with caps. Caps easily removed without damaging wire. Zinc-plated steel. Wire range: No. 18 thru 10 AWG, minimum 2 No. 6, maximum 2 No. 10 with 1 No. 12. 100 per pack.
HEAT SHRINK TUBE 3/16x4 8pc
Polyolefin tubing shrinks under heat application to insulate wiring up to half its diameter. Useful for repairing cords and covering tool handles. Makes strong rope loops and neat ends. 600V/mil dielectric strength. 2 to 1 shrink rate. 4".
View Details
Polyolefin tubing shrinks under heat application to insulate wiring up to half its diameter. Useful for repairing cords and covering tool handles. Makes strong rope loops and neat ends. 600V/mil dielectric strength. 2 to 1 shrink rate. 4".
100PK YEL WING NUT
Ideal Wing-Nut wire connector features contoured wings and fixed square wire spring to provide secure wire connection in bare copper wire. UL 94V-2 flame retardant shell rated at 221 degrees Fahrenheit and 600 volts. Reusable for easy repair and changes. UL (Underwriter's Laboratories) listed to 486C and CSA (Canadian Standards Association) certified to C22.2 #188. Compliant with Federal Specification w-s-610E.
View Details
Ideal Wing-Nut wire connector features contoured wings and fixed square wire spring to provide secure wire connection in bare copper wire. UL 94V-2 flame retardant shell rated at 221 degrees Fahrenheit and 600 volts. Reusable for easy repair and changes. UL (Underwriter's Laboratories) listed to 486C and CSA (Canadian Standards Association) certified to C22.2 #188. Compliant with Federal Specification w-s-610E.
100PK RED WING NUT
Ideal Wing-Nut wire connector features contoured wings and fixed square wire spring to provide secure wire connection in bare copper wire. UL 94V-2 flame retardant shell rated at 221 degrees Fahrenheit and 600 volts. Reusable for easy repair and changes. UL (Underwriter's Laboratories) listed to 486C and CSA (Canadian Standards Association) certified to C22.2 #188. Compliant with Federal Specification w-s-610E.
View Details
Ideal Wing-Nut wire connector features contoured wings and fixed square wire spring to provide secure wire connection in bare copper wire. UL 94V-2 flame retardant shell rated at 221 degrees Fahrenheit and 600 volts. Reusable for easy repair and changes. UL (Underwriter's Laboratories) listed to 486C and CSA (Canadian Standards Association) certified to C22.2 #188. Compliant with Federal Specification w-s-610E.
100PK ORG WIRE NUT
Ideal Wire-Nut wire connector features fixed square-wire spring to provide secure wire connection in bare copper wire. UL 94V-2 flame retardant shell is rated at 221 degrees Fahrenheit and 600 volts. Reusable for easy repair and changes. UL (Underwriter's Laboratories) listed to 486C and CSA (Canadian Standards Association) certified to C22.2 #188. Compliant with Federal Specification w-s-610E.
View Details
Ideal Wire-Nut wire connector features fixed square-wire spring to provide secure wire connection in bare copper wire. UL 94V-2 flame retardant shell is rated at 221 degrees Fahrenheit and 600 volts. Reusable for easy repair and changes. UL (Underwriter's Laboratories) listed to 486C and CSA (Canadian Standards Association) certified to C22.2 #188. Compliant with Federal Specification w-s-610E.
100PK TAN TWST WING NUT
Ideal Twister wire connector features contoured wings, ribbed cap, and fixed square wire spring to provide secure wire connection in bare copper wire. UL 94V-2 flame retardant shell rated at 221 degrees Fahrenheit and 600 volts. Reusable for easy repair and changes. UL (Underwriter's Laboratories) listed to 486C and CSA (Canadian Standards Association) certified to C22.2 #188. Compliant with Federal Specification w-s-610E.
View Details
Ideal Twister wire connector features contoured wings, ribbed cap, and fixed square wire spring to provide secure wire connection in bare copper wire. UL 94V-2 flame retardant shell rated at 221 degrees Fahrenheit and 600 volts. Reusable for easy repair and changes. UL (Underwriter's Laboratories) listed to 486C and CSA (Canadian Standards Association) certified to C22.2 #188. Compliant with Federal Specification w-s-610E.
2 PORT PUSH IN CONNECTOR
PushGard wire connector. Features include no twist connection, low insertion force for fast, easy application. Accepts solid and many stranded wire combinations. Clear shell makes connection easy to inspect. Rated to 600V maximum, shell rated to 105 degrees Celsius. Check port for continuity testing. Electrolytic tin-plated internal copper bus for high conductivity. Accepts #22 to #12 AWG wire. UL (Underwriter's Laboratories) listed and CSA (Canadian Standards Association) certified.
View Details
PushGard wire connector. Features include no twist connection, low insertion force for fast, easy application. Accepts solid and many stranded wire combinations. Clear shell makes connection easy to inspect. Rated to 600V maximum, shell rated to 105 degrees Celsius. Check port for continuity testing. Electrolytic tin-plated internal copper bus for high conductivity. Accepts #22 to #12 AWG wire. UL (Underwriter's Laboratories) listed and CSA (Canadian Standards Association) certified.
1" CUSHION CLAMP
Clamps are manufactured from the toughest of materials to resist common solvents, alkalis, dilute mineral acids, most organic acids, and most petrochemicals. Steel strap with 1 hole for attachment, rubber insert also reduces vibration. Ideal for applications where vibrations may occur. Secure with 1/4" screw.
View Details
Clamps are manufactured from the toughest of materials to resist common solvents, alkalis, dilute mineral acids, most organic acids, and most petrochemicals. Steel strap with 1 hole for attachment, rubber insert also reduces vibration. Ideal for applications where vibrations may occur. Secure with 1/4" screw.
12-10 RING TERMINAL
Vinyl-insulated barrel ring terminal rated a 600 volt maximum. Temperature rating: 167 deg (degrees) Fahrenheit/75 deg Celsius.
View Details
Vinyl-insulated barrel ring terminal rated a 600 volt maximum. Temperature rating: 167 deg (degrees) Fahrenheit/75 deg Celsius.
BLK SILICONE REPAIR TAPE
Silicone self-sealing repair tape. High quality tape that insulates all shapes of conductors to 400 volts. Insulates and seals surfaces from -65 deg (degrees) C (Celsius) to 260 deg C or -85 deg F (Fahrenheit) to 500 deg F. Fuses to itself in seconds to stay water tight. Permanent mold in 24 hours or in minutes with heat application. Stretches up to 300\% its original length. Ideal for electrical applications, plumbing projects, hose and tool repair, and more. 700 PSI rating.
View Details
Silicone self-sealing repair tape. High quality tape that insulates all shapes of conductors to 400 volts. Insulates and seals surfaces from -65 deg (degrees) C (Celsius) to 260 deg C or -85 deg F (Fahrenheit) to 500 deg F. Fuses to itself in seconds to stay water tight. Permanent mold in 24 hours or in minutes with heat application. Stretches up to 300\% its original length. Ideal for electrical applications, plumbing projects, hose and tool repair, and more. 700 PSI rating.
HEAT SHRINK TUBE 3/32x4 8pc
Polyolefin tubing shrinks under heat application to insulate wiring up to half its diameter. Useful for repairing cordsand covering tool handles. Makes strong rope loops and neat ends. 600V/mil dielectric strength. 2 to 1 shrink rate. 4 inches long.
View Details
Polyolefin tubing shrinks under heat application to insulate wiring up to half its diameter. Useful for repairing cordsand covering tool handles. Makes strong rope loops and neat ends. 600V/mil dielectric strength. 2 to 1 shrink rate. 4 inches long.
100PK GRN GROUND SCREWS
100PK GRN GROUND SCREWS
View Details
100PK GRN GROUND SCREWS
16-10 AWG WIRE CONNECTOR 76B RED
GB WireGard wire connectors make quick, secure connections for positive continuity. Their tough, thermoplastic shell shields against environmental extremes. The color-coded high dielectric shell features a deep skirt design to prevent exposure of bare wire while providing superior flash-over protection. Splices copper-to-copper. GB connectors comply with Federal Specification W-5-610d and are UL (Underwriter's Laboratories) 486C listed and CSA (Canadian Standards Association) certified. Threads wire immediately. Firm-grip surface. UL listed.
View Details
GB WireGard wire connectors make quick, secure connections for positive continuity. Their tough, thermoplastic shell shields against environmental extremes. The color-coded high dielectric shell features a deep skirt design to prevent exposure of bare wire while providing superior flash-over protection. Splices copper-to-copper. GB connectors comply with Federal Specification W-5-610d and are UL (Underwriter's Laboratories) 486C listed and CSA (Canadian Standards Association) certified. Threads wire immediately. Firm-grip surface. UL listed.
22-10 AWG WIRE CONNECTOR YLW-100
GB WireGard wire connectors make quick, secure connections for positive continuity. Their tough, thermoplastic shell shields against environmental extremes. The color-coded high dielectric shell features a deep skirt design to prevent exposure of bare wire while providing superior flash-over protection. Splices copper-to-copper. GB connectors comply with Federal Specification W-5-610d and are UL (Underwriter's Laboratories) 486C listed and CSA (Canadian Standards Association) certified. Threads wire immediately. Firm-grip surface. UL listed.
View Details
GB WireGard wire connectors make quick, secure connections for positive continuity. Their tough, thermoplastic shell shields against environmental extremes. The color-coded high dielectric shell features a deep skirt design to prevent exposure of bare wire while providing superior flash-over protection. Splices copper-to-copper. GB connectors comply with Federal Specification W-5-610d and are UL (Underwriter's Laboratories) 486C listed and CSA (Canadian Standards Association) certified. Threads wire immediately. Firm-grip surface. UL listed.
*22-14AWG CAP CONNECTOR ORANGE
GB WireGard wire connectors make quick, secure connections for positive continuity. Their tough, thermoplastic shell shields against environmental extremes. The color-coded high dielectric shell features a deep skirt design to prevent exposure of bare wire while providing superior flash-over protection. Splices copper-to-copper. GB connectors comply with Federal Specification W-5-610d and are UL (Underwriter's Laboratories) 486C listed and CSA (Canadian Standards Association) certified. Threads wire immediately. Firm-grip surface. UL listed.
View Details
GB WireGard wire connectors make quick, secure connections for positive continuity. Their tough, thermoplastic shell shields against environmental extremes. The color-coded high dielectric shell features a deep skirt design to prevent exposure of bare wire while providing superior flash-over protection. Splices copper-to-copper. GB connectors comply with Federal Specification W-5-610d and are UL (Underwriter's Laboratories) 486C listed and CSA (Canadian Standards Association) certified. Threads wire immediately. Firm-grip surface. UL listed.
4/0-12 SPLT BLT CONNECTOR
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
View Details
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
1-4 SPLIT BOLT CONNECTOR******
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
View Details
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
2-6 SPLIT BOLT CONNECTOR
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
View Details
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
4-8 SPLIT BOLT CONNECTOR
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
View Details
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
6-8 SPLT BLT CONNECTOR
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
View Details
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
HEAT SHRINK TUBE ASRTD 8pc
Use for repairing electrical cords on tools and appliances, handle grips on hand tools, etc. Full shrink ratio of 2-1 forms a smooth, tight fitting insulation for most applications with a high degree of flexibility. Carefully apply heat (below 200 deg F.) around the tubing until it shrinks tightly. 4" length, UL listed, CSA approved.
View Details
Use for repairing electrical cords on tools and appliances, handle grips on hand tools, etc. Full shrink ratio of 2-1 forms a smooth, tight fitting insulation for most applications with a high degree of flexibility. Carefully apply heat (below 200 deg F.) around the tubing until it shrinks tightly. 4" length, UL listed, CSA approved.
8-10 SPLT BLT CONNECTOR
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
View Details
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
HEAT SHRINK TUBE 1/8x4" 7pc
Use for repairing electrical cords on tools and appliances, handle grips on hand tools, etc. Full shrink ratio of 2-1 forms a smooth, tight fitting insulation for most applications with a high degree of flexibility. Carefully apply heat (below 200 deg F.) around the tubing until it shrinks tightly. 4" length, UL listed, CSA approved.
View Details
Use for repairing electrical cords on tools and appliances, handle grips on hand tools, etc. Full shrink ratio of 2-1 forms a smooth, tight fitting insulation for most applications with a high degree of flexibility. Carefully apply heat (below 200 deg F.) around the tubing until it shrinks tightly. 4" length, UL listed, CSA approved.
10-12 SPLT BLT CONNECTOR
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
View Details
For copper-to-copper connections. Bolt and nut made of high-strength, corrosion-resistant silicon bronze alloy. For making pigtail, tap or straight splice with larger conductors, solid or stranded. Split bolts slip over continuous wire. The end of the other wire is then placed over the continuous wire inside the unit and the nut is tightened. Connections must be completely insulated. UL (Underwriter's Laboratories) listed.
